
As simple as water
Why Filtech for your company
COMPACTNESS
HIGH FLOW CAPACITY
FEW QUICK FITTINGS
TOUCH SCREEN DISPLAY
WI-FI IOT TECHNOLOGY
EASY MAINTENANCE
Our system plus points

Patented system
VESSEL SYSTEM VR30
Maximum efficiency
given by the integrated system.

Patented design
made in Italy
Extremely easy
membrane change
Optimization of fitting
sytems for maximum reliability
Double seal for maximum safety
Designed to work in series
for maximum effectiveness
Savings on maintenance
and spare parts

Patented
system

Patented system
SMART DRAIN
Maximum system lifespan thanks to
automatic waste water management

Level between permeate
and drain always optimized
to the conditions
Constant working pressure
inside the system
Increased
membrane life
Reduction of technical call
and service
Savings on maintenance
and spare parts

Patented
system

Patented system
RO-CHECK
Total control of the system thanks to the wi-fi connection and the dedicated portal

Remote control of parameters
Notifications sending in case of alarms
Interaction with the system parameters
Integrated AI for system
parameter analysis
Simultaneous use of Wi-Fi,
mobile data or local network
(access point)
Savings on maintenance
and spare parts

RO-Check
ready

Patented system
Puro system
Reduction of system maintenance times, thanks to the automatic sanitization.

Drastic reduction in system
sanitization time
Simplicity and ease of
replacement
Complete and safe
sanitization
Savings on maintenance
and spare parts

Easy
maintenance

Patented system
Remin FEELTRANT
No water waste, right from the first dispensing.

Avoids the PH peak
due to long contact
with minerals
Exclusive gradual
dosing system
Savings on maintenance
and spare parts

Easy
maintenance

Patented system
SAFE DROP
ANTIFLOODING SYSTEM
Total safety in case of water leaks

Raises the alarm in case of any type of flooding
Can be integrated
with the ROCHECK system
Immediate notification of alarms via the receiver (RO/Heedrop)
Blocking the incoming water flow block to anticipate the problem through an external solenoid valve
Savings on maintenance
and spare parts

RO-Check
ready

Patented system
HEEDROP FLOW METER
Total control of water consumption

Simplicity and effectiveness in reading the litres and water flow
Innovative technology
of flow rates reading
Wide reading range: from
a single coffee shot to
managing high flows
Integrated ROCHECK
remote control system
Savings on maintenance
and spare parts

RO-Check
ready

Patented technology for reverse osmosis
Products for professional usage
DP LINE
The DP system is a patented technology that grants to achieve large flow rates in a minimum space.
It is a super compact system: in just 22 cm of space, it delivers up to 500 liters of water per hour.
Designed with an essential and functional design, it combines intuitive use and ease of maintenance.

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 500
REVERSE OSMOSIS DEVICE
The DP500 is reverse osmosis for professional use with the maximum direct flow of its range. With its 6 membranes, in a very small space this machine is capable of delivering up to 500 liters per hour.
Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow
and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system
Code | 06PRO201 |
Flow rate at 25° C | 500 l/h |
Flow rate at 15° C | 440 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Drinking Water Inlet) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95% |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 34.6 kg |
Measures | 22 cm x 66 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 500T
REVERSE OSMOSIS DEVICE WITH INTERNAL TANK
The DP500T is the reverse osmosis machine for professional use with the maximum direct flow capacity of its range and it is also equipped with n 2 x 8-liter tanks (4 l) each to have even more water available in case of need. With its 6 membranes, in a very small space this machine is capable of delivering up to 500 liters an hour plus the water accumulated in its tanks.
Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the flow and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes this device one of the most competitive on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 06PRO202 |
Flow rate at 25° C | 500 l/h |
Flow rate at 15° C | 440 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Acqua Ingresso Potabile) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | 2 x 8 l ( 4 l) |
Weight | 46.6 kg |
Measures | 43,5 cm x 66 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 400
REVERSE OSMOSIS DEVICE
The DP400 is the reverse osmosis for professional use that best sums up the compromise between high flow rate and small size. With its 4 membranes, in a very small space this machine is capable of delivering up to 400 liters per hour. Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow and the conductivity of the outlet water.
The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Codice / Code | 04PRO201 |
Flow rate at 25° C | 400 l/h |
Flow rate at 15° C | 280 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Acqua Ingresso Potabile) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 30,1 kg |
Measures | 22 cm x 55 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 400T
REVERSE OSMOSIS DEVICE WITH INTERNAL TANK
The DP400T is the reverse osmosis for professional use that best sums up the compromise between high flow rate and small size and it is also equipped with n 2 x 8-liter tanks (4 l) each to have even more water available in case of need. With its 4 membranes, in a very small space this machine is capable of delivering up to 400 liters per hour plus the water accumulated in its tanks.
Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow
and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 04PRO202 |
---|---|
Flow rate at 25° C | 400 l/h |
Flow rate at 15° C | 280 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Acqua Ingresso Potabile) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | 2 x 8 l ( 4 l) |
Weight | 42,4 kg |
Measures | 43,5 cm x 55 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 300
Reverse osmosis device
The DP300 is the reverse osmosis for professional use, with on-board prefiltration, more compact of its line and despite its size it can deliver up to the extraordinary flow rate of 300 liters/hour (210 l/h at 15 °C).
Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO206 |
---|---|
Flow rate at 25° C | 300 l/h |
Flow rate at 15° C | 210 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 300 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 23,2 kg |
Measures | 22 cm x 45 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 300T
Reverse osmosis device with internal tank
The DP300T is the reverse osmosis for professional use, with on-board prefiltration, more compact of its line and despite its size it can deliver up to the extraordinary flow rate of 300 liters/hour (210 l/h at 15 °C) and for the T version there is an additional 8 liter tank (4 l) to have even more water available in case of need.
Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO207 |
---|---|
Flow rate at 25° C | 300 l/h |
Flow rate at 15° C | 210 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | 1 x 8 l ( 4 l ) |
Weight | 33,7 kg |
Measures | 43,5 cm x 45 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 300SLIM
Reverse osmosis device
Maxi flow rate in the minimum space. This direct flow RO can deliver up to 300 l/h and thanks to the external pre-filtration only in 14,5 cm of thickness. Being able to work both vertically and horizontally, this machine covers many needs, especially when there is the need a good flow rate but little space available.
Like all the machines of the DP line, there is the possibility of remote control via ROCheck and easy spare parts management.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO208 |
---|---|
Flow rate at 25° C | 300 l |
Flow rate at 15° C | 210 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 300 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 17 kg |
Measures | 45 cm x 41 cm x H 14,5 cm |



Prefiltration provided

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 300SLIM LT
Reverse osmosis device
Maxi flow rate in the minimum space. This direct flow RO can deliver up to 300 l/h and thanks to the external pre-filtration only in 14,5 cm of thickness. Being able to work both vertically and horizontally, this machine covers many needs, especially when there is the need a good flow rate but little space available.
Advanced electronics with the possibility of controlling alarms and filter life from the display, always easy maintenance.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO208 |
---|---|
Flow rate at 25° C | 300 l |
Flow rate at 15° C | 210 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 300 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 17 kg |
Measures | 45 cm x 41 cm x H 14,5 cm |



Prefiltration provided

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 200
REVERSE OSMOSIS DEVICE
The DP200, which shares all the technology of the DP line, is based on a delivery of up to 200 l/h, where there is no need for a lot of flow but to exploit all the versatility of use of average consumption. This model also has advanced electronic management even remotely with ROCheck and ease of maintenance with direct access for both filter and
membrane changes.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO201 |
---|---|
Flow rate at 25° C | 240 l/h |
Flow rate at 15° C | 170 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 22,4 kg |
Measures | 22 cm x 45 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 200T
REVERSE OSMOSIS DEVICE WITH INTERNAL TANK
The DP200T, which shares all the technology of the DP line, is based on a delivery of up to 200 l/h, where there is no need for a lot of flow but to exploit all the versatility of use of average consumption. This model also has advanced electronic management even remotely with ROCheck and ease of maintenance with direct access for both filter and membrane changes. For the T version, an additional 8 litre (4 l) tank is provided to have even more water available if necessary.
- Can be integrated with Safedrop anti-flooding system

Codice / Code | 02PRO202 |
---|---|
Flow rate at 25° C | 240 l/h |
Flow rate at 15° C | 170 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | 1 x 8 l ( 4 l ) |
Weight | 32,9 kg |
Measures | 43,5 cm x 45 cm x H 44 cm |





The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 200SLIM
Dispositivo a osmosi inversa
The DP200 SLIM is the most compact reverse osmosis for professional use of the industry, and despite its size it can deliver up to 200 liters an hour. Thanks to its advanced electronics we can know directly from the app or on the display all the parameters useful for a professional use, from the inlet flow up to the outlet flow and the conductivity of the outlet water. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO203 |
---|---|
Flow rate at 25° C | 240 l |
Flow rate at 15° C | 170 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Acqua Ingresso Potabile) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 16,2 kg |
Measures | 43 cm x 41 cm x H 14,5 cm |



Pre filtration provided

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP 200SLIM LT
Reverse osmosis device
The DP200 SLIM LT is the most compact reverse osmosis for professional use of the industry, and despite its size it can deliver up to 200 liters an hour. Thanks to its advanced electronics we can know directly from the display all the alarms and the duration of the filter. The ease of maintenance, from the filter change to the membrane change, makes the DP one of the most competitive reverse osmosis on the market.
- Can be integrated with Safedrop anti-flooding system

Code | 02PRO204 |
---|---|
Flow rate at 25° C | 240 l |
Flow rate at 15° C | 170 l/h |
Membrane | 3012 - 500 GPD |
Prefiltration | FC500 - 500.000 l (Inlet Drinking Water) |
Inlet temperature | Max 35° C - Min 5° C |
Nominal Recovery Ratio | 50% |
Rejection | 92% / 95 % |
Input pressure | Max 6 bar - Min 1 bar |
Pump | 1000 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 500 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 16,2 kg |
Measures | 43 cm x 41 cm x H 14,5 cm |



Pre filtration provided
LINEA DP SMART
Innovation that simplifies life.
The DP smart system shares the compactness, versatility and ease of use of the DP line and allows to reach large flow rates with a minimum space requirement. It is a system that uses the front filter and the new vessel with smart drain management.

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART 165R
Reverse osmosis device
The R version of the Smart line shares the qualities of compactness, versatility and ease of use of the DP line.
Front filter and new vessel with intelligent waste management.
Furthermore, the machine is fitted with a water-cooled vane pump that allows 24-hour work.
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 185 l/h |
Flow rate at 15° C | 130 l/h |
Membrane | 2 x 2312 – 330 GPD |
Prefiltration | FC130 SMART – 42.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Rotattiva / Vane R. 300 l |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 15,1 Kg |
Measures | 51 cm x 13,3 cm x H 40 cm |


TFT Display

Code 02PRO107
LCD Display

Code 02PRO103

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART 165RT
REVERSE OSMOSIS DEVICE WITH INTERNAL TANK
Compact, easy to use, and tireless. The DP SMART 165 RT has a front filter for an easy maintenance, the new vessel with the intelligent drain management and a water cooled vane pump to work long periods of time furthermore it has an internal tank to have greater boost and water availability at the beginning of each delivey.
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 185 l/h |
Flow rate at 15° C | 130 l/h |
Membrane | 2 x 2312 – 330 GPD |
Prefiltration | FC130 SMART – 42.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Rotattiva / Vane R. 300 l |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | SI – 4 l (2l) |
Weight | 17,9 Kg |
Measures | 62 cm x 17 cm x H 40 cm |


Schermo TFT

Codice 02PRO108
Schermo LCD

Codice 02PRO104

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART 165M
Reverse osmosis device
The DP SMART 165 M is a compact machine with very small dimensions to optimize the space of any environment but with record performances and the pre filter is placed at the front for an easy maintenance. With its innovative technology for the sector, the boosted pump, it effectively eliminates all problems linked to low inlet pressure. The new vessel has also the smart drain management.
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 165 l/h |
Flow rate at 15° C | 120 l/h |
Membrane | 2 x 2312 – 330 GPD |
Prefiltration | FC130 SMART – 42.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Booster 300 l |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 9,1 kg |
Measures | 47 cm x 10,7 cm x H 40 cm |


TFT Display

Code 02PRO105
LCD Display

Code 02PRO101

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART 165MT
Reverse osmosis device with internal tank
Along with the versatility and compactness of the DP SMART 165 M, this device is fitted with an additional internal tank for a greater sprint and water availability at the beginning of each water delivery. As for the M model, it has the booster pump, new vessel and the filter is mounted on the front.
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 165 l/h |
Flow rate at 15° C | 120 l/h |
Membrane | 2 x 2312 – 330 GPD |
Prefiltration | FC130 SMART – 42.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Booster 300 l |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | SI – 4 l (2l) |
Weight | 14 kg |
Measures | 62 cm x 17 cm x H 40 cm |


TFT Display

Codice 02PRO106
LCD Display

Codice 02PRO102

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART100M
Reverse osmosis device
Like its big sister, it shares the compactness with the benefit of the diaphragm pump to avoid low pressure problems and the smart drain, suitable when there is no need for particular volumes of water to consume
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 110 l/h |
Flow rate at 15° C | 80 l/h |
Membrane | 2 x 2012 – 220 GPD |
Prefiltration | FC130 SMART – 42.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Booster 210 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 9,1 kg |
Measures | 47 cm x 10,7 cm x H 40 cm |


TFT Display

Code 02PRO117
LCD Display

Code 02PRO110

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
DP SMART50M
Reverse osmosis device
- SUPER COMPACT
The latest born in Filtech, the DP SMART 50 M is the most compact machine in the DP line, with very small dimensions (39×10.7×40 cm), compact vessel with a membrane
and filter placed at the front for easy maintenance, it can work in any position. All of these features represents the new Filtech reverse osmosis designed for low consumption with diaphragm pump and stainless steel case.
- Can be integrated with Safedrop anti-flooding system

Flow rate at 25° C | 60 l/h |
Flow rate at 15° C | 40 l/h |
Membrane | 1 x 2012 – 220 GPD |
Prefiltration | FC130 SMART – 21.000 l |
Inlet temperature | Max 35° C - Min 5° C |
Input pressure | Max 6 bar - Min 1 bar |
Pump | Booster 150 l/h |
Power supply | 220VAC 50Hz |
Electric absorption | 115 W |
Connection | 3/4” BSP |
Tank | No |
Weight | 7,7 kg |
Measures | 39 cm x 10,7 cm x H 40 cm |


TFT Display

Code 01PRO103
LCD Display

Code 01PRO101

The machine comply with the requirements of european directives and is produced in compliance with DM174 06/04/2004 and DM25 of 07/02/12.
HDO DEMI
Reverse osmosis device
The HDO DEMI has been designed for all those situations where a completely decriminalized water is required for technical purposes. Inside the same hull, compact and 10.5 cm thick, there is the osmotic membrane, a booster pump and both the pre-filtration with activated carbon and the postfiltration with resins to demineralize the water.
Features
- Compact
- LCD screen
- Anti flooding alarm
- Membrane flushing
- Carbonblock 5μm prefiltration
- FC 130
- Post demineralizing filtration
- FR150 D
- Can be integrated with Safedrop anti-flooding system
Model | HDO 30 DEMI |
Code | 01HDE001 |
Flow (l/h) | 30 ( + TANK ) |
Membrane | 1 X 220 GPD |
Pump | SILENT |
PRE FILTRATION | FC 130 |
POST FILTRATION | FR 150 DEMI |


Measures 43 cm x 44 cm x h 10,5 cm
HEEDROP SYSTEM
Flow meter with the management, also from remote, of drinking water filtering systems with wifi connection


Heedrop has the possibility of programming the system via an integrated web interface and the management of it via a dedicated portal.
Like all ROCheck system devices, it is possible, not only of a simple reading of some parameters, but also of interacting with the filtering system, establishing the way in which it has to work, there is the possibility of monitoring all the systems installed. The reader is in any case not bound to the web part but can also be configured from its display. Thanks to its innovative technology, Heedrop can read a wide range of flow rates down to values as low as an espresso shot.
Also optional is the anti-flooding module with external control of a shut-off solenoid valve, to completely shut off the system for greater safety. This module also has the option of being integrated into the ROCheck system for remote monitoring.
SAFEDFROP SYSTEM
EXTERNAL ANTI-FLOODING SYSTEM

SAFEDROP is an integrated anti-flooding safety system capable of giving alarms in the event of water leaks, not only from water treatment devices, but from any device present in the room. It can be connected to data networks to send notifications and, last but not least, it can manage an external solenoid valve to block incoming water and avoid damage or waste of water.
